Incoloy
Incoloy bars and rods
Incoloy bars and rods
Application Incoloy 800 Round Bars and Rods :
- Processing plant for sulphuric, phosphoric and acetic acids.
- Pulp and paper processing.
- Components in gas scrubbing plants.
- Seawater cooling equipment.
- Oil refinery components.
- Wires in electrostatic precipitators.
Special Features :
- Each bundle covered with plastic for protection against extreme weather.
- End of Incoloy 800 ASTM B408 Round Bar protected by plastic caps.
- Bundles strapped with plastic strips.
- Each radius of U-Bend tube separated by a separato.
- Packaging list (laminated) placed with box/crate.
Specification of 800 Incoloy Round Bars :
| Grade | Incoloy Round Bar |
| Incoloy Square bar size | 4 to 100mm |
| Incoloy Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Hot Rolled Steel Hex Bar size | 2-100mm A/F |
| Incoloy Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Incoloy Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Hot Rolled Steel Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Incoloy Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Incoloy Section | 3.0 to 12.0mm thickness |
| Hot Rolled Steel Round bar size | Diameter: 3-~800mm |
| Incoloy Billet Size | 1/2" to 495mm Diameter |
| Incoloy Round Bar Standard Dimensions |
Diameter / Height: Incoloy Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
| Incoloy Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Incoloy Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Hot Rolled Steel Technique | Incoloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Incoloy Condition | Hardened & tempered, annealed |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Form | Incoloy Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square Bar, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Processing | Bar cutting to 650mm |
Equivalent Grades of Incoloy 800 Round Bars :
|
STANDARD |
WERKSTOFF NR. |
UNS |
GOST |
AFNOR |
JIS |
BS |
EN |
OR |
|
Incoloy 800 |
1.4876 |
N08800 |
ЭИ670 |
Z8NC32-21 |
NCF 800 |
NA 15 |
X10NiCrAlTi32-20 |
XH32T |
Chemical Composition of 800 Incoloy Round Bars :
|
Grade |
Ni |
Cr |
Fe |
Mb |
Ti |
Cu |
Mn |
C |
S |
Al |
Al + Ti |
|
Incoloy 800 |
30.0 - 35.0 |
19.0 - 23.0 |
39.5 min |
- |
0.15 - 0.60 |
- |
- |
0.10 max |
- |
0.15 -0.60 |
3.15 - 4.15 |
Mechanical Properties of Incoloy 800 Round Bars :
|
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
|
7.94 g/cm3 |
1385 °C (2525 °F) |
Psi – 75,000 , MPa – 520 |
Psi – 30,000 , MPa – 205 |
30 % |
Physical Properties of Incoloy WERKSTOFF NR. 1.4876 :
|
DENSITY (G/CM 3) |
DENSITY (LB/IN 3) |
MELTING POINT (°C) |
MELTING POINT (°F) |
|
7 .94 |
0.287 |
1357 – 1385 |
2475 – 2525 |